Suppose you have a missing tooth that needs to be replaced with an artificial tooth, such as a crown or bridge. Nowadays, dentists often choose Zirconia crown price Turkey. These crowns are preferred and considered better than porcelain, metal, or full gold crowns because of their outstanding strength, durability, and excellent aesthetics.
Some dentists use Zirconium crowns cost turkey composites exclusively for porcelain restorations, especially when restoring a single tooth. In the next part of the article, we will list all the features of the price of zirconia crown, their benefits, expected costs, and types.
What is a dental crown?
A dental crown—a dental cap—is a treatment procedure used by dentists to replace a decayed tooth. The crown covers the entire tooth on all sides and is designed to mimic the shape, size, and color of a natural tooth. It is placed on the tooth or over a dental implant to give it the necessary strength, support, and protection.
Dental crowns are often used to restore teeth that have worn down, broken down, or undergone root canal treatment. They can also improve the appearance of a discolored tooth or provide strength and durability to support a dental bridge.
Crowns can be made from various materials, including metal alloys, porcelain, ceramic, or a combination. Your dentist will determine the best type of dental crown to suit your needs based on factors such as the tooth’s location in the mouth, the extent of the damage it has sustained, and your financial budget.
What is zirconia crown?
Zirconia crown price Turkey is a white material used to replace the gray metal in classic metal abutment porcelain veneers and prosthetic bridge frameworks. Zirconium crowns cost Turkey and can be used for teeth that are excessively stained and cannot be corrected by bleaching.
In cases where orthodontic treatment cannot be applied or is preferred, in instances where dislocation or separation in the teeth is observed, in old and large teeth, dental occlusion and masonry—caps, and bridges for front and back teeth, and implant dentures to provide smile aesthetics.
Zirconium crowns cost Turkey and can be quickly completed after the lower jaw grows in 18-20 years. To make zirconia teeth, shave about 1-2 mm from the surface of the teeth. This shaving process is to numb the teeth and then make a temporary tooth-shaped coating on the color and shape.
Thus reducing the hot and cold moaning of the teeth. In addition, the temporary cover makes the patient feel safe in social life. Zirconium crowns cost turkey and are tested until the patient is satisfied, and the construction process is completed in about a week.
Types of Zirconia Crown
It is worth noting that there are many types of zirconium crowns cost Turkey, including the following:
Crowns made of all ceramic
All-ceramic crowns are a popular alternative for patients who want their crowns to match their natural teeth perfectly. Modern porcelain crowns can be precisely colored to match the patient’s teeth.
For all porcelain crowns, the total thickness is made of transparent ceramic. This allows the crown to be thicker than clear porcelain, providing a natural, polished appearance.
Resiconium crowns
Resiconium crowns in Türkiye are durable, strong, and long-lasting. Zirconia is a type of white ceramic and, due to its hardness, is considered the strongest material used in dentistry.
So, zirconia must be cured with specific computer systems, and porcelain crowns can be placed to achieve the final shade and shape of the tooth. Many dentists and patients choose zirconia crowns for their durability. In addition, the human body tolerates zirconia well.
Metal porcelain crowns
Metal-ceramic crowns consist of a metal base structure covered with a ceramic layer. This type of hybrid crown can provide a strong, permanent solution and natural-looking results.
While metal ceramic crowns have gradually lost their appeal in the past few years, they are still widely used thanks to their durability. This type of crown is also known as porcelain fused to metal.
How Zirconia Crowns Are Placed
The stages of obtaining zirconia crown price turkey are similar to other dental crowns (PFM), but some are unique. The following are the distinct and memorable stages only for zirconia crown price Turkey:
Digital Edition:
Zirconia crown price Turkey requires precise measurements and a perfect fit. Therefore, digital dental impressions are taken using a special scanner to create a 3D image of the teeth. This eliminates the need for traditional dental impressions, which can be messy and uncomfortable.
Computer-aided design (CAD):
Digital printing is used to create a computer-generated design for zirconium crowns. The design is based on the specific size and shape of the teeth and considers the patient’s bite and other factors.
Computer Aided Manufacturing (CAM):
Once the crown design is completed via CAD, it is manufactured. A special milling machine uses the CAD design to create a precise, defined crown. This process may take several hours to complete.
Color Matching:
Zirconia crowns price Turkey can be matched to the patient’s natural teeth, including choosing the right shade and clarity to blend seamlessly with the surrounding teeth.
Final fitting:
Once the zirconia crown price Turkey has been fabricated. Carefully fitted and adjusted to ensure a perfect fit and comfortable bite. The crown is then permanently bonded to the tooth using a special dental cement.
The stages of obtaining zirconia crown price Turkey are similar to those of other dental crowns in dental clinics. However, digital impressions, computer-aided design and manufacturing, and color matching are newer materials for zirconium crowns. They contribute to their precise fit and natural appearance.
Zirconium Crown Procedure
At Mavidenta Dental Center in Turkey, we complete full-rimmed zirconia crowns in just three days and porcelain crowns in four days. However, we recommend that our patients stay an additional night, which is included in the cost of treatment, for a final examination. We have explained the timings below in detail:
1-Preparing the teeth and taking an impression
Before starting dental preparation, our dentists apply a local anesthetic to the work area to prevent pain or discomfort. After ensuring that numbness occurs within five to ten minutes, dentists reduce the teeth’ surfaces.
Our dentists take extra care during this procedure to prevent any damage to the dental pulp caused by excessive reduction or heat caused by the work.
This process takes about five to ten minutes per tooth. When dentists complete the tooth preparation phase, they take impressions of your teeth with silicone impression material. We then transfer the dental impression to our dental laboratory.
2-3D design and temporary crowns
Temporary crowns are plastic versions of permanent zirconia crowns. After the dental preparation procedure, your teeth are very likely to be sensitive, so you should get your temporary crowns ready the same evening as your first appointment.
The digital scanning phase begins once the laboratory receives an impression of your teeth. This stage allows us to transfer the actual model of your prepared teeth into the digital environment. The digital scanning phase is followed by the 3D design phase of your temporary teeth on a computer.
Our dentists and dental technicians collaborate during the design phase to manufacture temporary crowns in a highly aesthetic way that is perfectly compatible with your healthy teeth. We welcome our patients to join this stage to fulfill their special wishes about their teeth.
3-preview the mock-up
On the evening of the first visit, the dentist attaches the temporary crowns to your teeth. Temporary crowns give us an idea of how the final zirconia crowns will look on your teeth, and this stage is very useful.
Because it enables us to evaluate the appearance of temporary crowns and make the necessary adjustments as our patients desire, it is transferred to the design of permanent zirconia crowns once the desired appearance is achieved.
4-Experimenting with the zirconia base
At this appointment, we remove the temporary crowns to ensure that the zirconia base suits your teeth. We inspect any pre-contact and make other necessary adjustments to the permanent zirconia base.
These procedures usually take about fifteen to forty-five minutes. Next, our dentists reattach the temporary crowns and send the zirconia base to our dental laboratory. We skip this stage when we manufacture full-edge zirconia crowns.
5-permanent installation of zirconia crowns
Our expert dental technicians apply a layer of porcelain on top of the zirconia base for improved esthetics. Once this is completed in the laboratory, we place the dental crowns on your teeth without cementing them.
We evaluate their fit and appearance one last time so we can make any adjustments before installing permanent crowns. We check again after fixation for any prior contact so that patients feel better after permanent fixation.
Zirconia Crown Price Turkey
Zirconia crowns are a preferred option in Turkey for dental restorations due to their strength and ability to mimic natural teeth. This translates to a smile that looks and functions well. Turkey has become a popular destination for dental tourism specifically because zirconia crowns are more affordable there than in many other countries. However, choosing a dentist based on experience and the quality of materials used is just as important as finding a reasonable price.
How long does zirconium veneers last?
The time of the procedure depends on the extent of tooth damage. If there is significant tooth damage, the dentist may need to build up the tooth with a medium filling to correct the crown. Generally, you will attend the first appointment where the damaged tooth is positioned correctly.
You will then receive a temporary crown for use while the permanent crown is created. The temporary covering will be removed, and the molded crown will be cemented.
In either case, appointments should take no more than 2 hours and can take up to 30 minutes, although the process may take 2 to 5 days. Depending on the number of crowns needed, the entire process can be completed in less than five days.
Conclusion
A zirconia crown price turkey is a tooth-shaped covering attached to a dental implant. Crowns are one of the most common medical procedures that enhance the appearance and function of teeth. Custom crowns are made using a variety of materials.
Zirconium is a metal that belongs to the titanium family and is used to make zirconium. It is one of the most popular materials used in dental crowns because of its longevity and biocompatibility.
It blends well with natural teeth in terms of color and function. The superior strength of zirconium crowns cost turkey, and their natural, attractive appearance makes them the preferred alternative to traditional crowns.
FAQS
How many teeth are cut in zirconium veneers?
The amount of wear (cutting) of the teeth in zirconium crowns varies from tooth to tooth. If it thinks of the same teeth, it is more than just an engraving of a porcelain plate. Less cutting is sufficient compared to metal-backed coatings. The desired result determines the treatment plan and the amount of slaughter.
Does the smell of zirconium make the mouth taste bad?
It is impossible to originate from zirconium manufactured with extreme precision according to the teeth. Of course, oral care and teeth cleaning are essential. Zirconium does not cause bad breath in people with good oral care and healthy gums.
Does zirconium teeth change color?
There is no coloring as they are glossy, smooth, and glassy surfaces. Residues that may stick to food can stick to the surface, but they will disappear with the first cleaning. This also applies to tea, coffee, and cigarettes. Lack of discoloration is not a reason to reduce our toothbrush use and oral care but rather our motivation for better care.
by